One of the earliest instances of porous asphalt pavements is found in the parking area for the guests and visitors at the Walden Pond State Reservation in Massachusetts that was built back in 1977. Most of the residential as well as commercial driveways are normally finished with either concrete or asphalt. But when you are renovating your existing driveway or building a new one, it is imperative to have a look at the various benefits offered by the asphalt driveways Melbourne has over concrete pavements along with a relatively low pricing that is typically 30 to 40 percent lower than concrete pavements.
Asphalt can be installed very fast with speedy usability
The asphalt driveways Melbourne building owners such as you acquire can be laid within one or two days under normal conditions. It also depends on the size and extension of the project. Concrete, on the other hand, may take even twice the time for installation and even longer time to set. If the weather conditions are optimum, asphalt can be installed in driveways of commercial premises and ready to be used within two days of installation.
Economical plus points of asphalt
Asphalt is relatively a low-priced building material, and it is less costly not just in terms of its actual price, but also in the time taken for the completion of the project. A typical asphalt driveway Melbourne cost can be about $2 to $5 per each square foot. Though this may vary, to some extent, it also depends on the conditions of the project, whether it’s residential or commercial and whether the project needs any decorative elements. But all in all, it can be said that asphalt is a cost-effective choice when it comes to building driveways. See more at Asphalt Melbourne
Asphalt paved driveways provide additional safety
The safety features of asphalt driveways are reflective of their smooth finish, which provides drivers skid resistance, better visual distinction of road markings and reduced splash back. It is important to note here that asphalt pavements don’t allow accumulation of snow or rain water on the road surface.
Asphalt paving is a recyclable solution
Asphalt, being a recyclable substance, can be used over and over again as its life-cycle virtually never ends. That’s the reason commercial asphalt services Melbourne wide offering asphalt paving solutions are so popular among commercial property owners. When you use asphalt for paving your driveways, you can take care of your natural resources with the use of the same substance repeatedly.
Asphalt driveway requires a minimum maintenance
If the asphalt driveways Melbourne has in your commercial property begin to show little signs of linear cracking after long wear and tear, it can be easily repaired without incurring a heavy repair cost. You can get the cracks sealed by various kinds of good quality crack sealants that are widely available or ask your asphalt driveway installer to help you with the repairs which wouldn’t cost very much.
Plus, with preventive maintenance on a regular basis, such as sweeping, seal coating, crack filling and general upkeep that are normally provided by asphalt contractors, can help your asphalt driveway to remain spic and span for as long as 20 years.